Saturday, March 21, 2015

Boss Tremolo TR 1 and Behringer UT100 Mod

Mods for more tone options and balance the on and off stomp's volume:

  • Replace the R9 resistor from 10K to 18K (or more), to balance the on and off stomp volume. I've choosen 18K.
  • Add a on-off-on toggle switch to select the C4 values (or no C4), this will make a subdued, but perceptive, diference in the effect tone. The middle position will select none capacitor, the Boss TR1 came originally with 0,1uF cap and the Behringer came with a 0,68uF eletrolitic cap. You can select 0,1uF, 0,68uF and none capacitor, or try out others values.

See the picture:


Boss Tremolo TR 1 and Behringer UT100 Mod



*Use Boss schematic above to mod this Behringer stomp box.


Boss HyperFuzz FZ-2 or Behringer Super Fuzz SF300 Mod

Mods for a more pleasing distortion without the "octave" effect and adding the volume control in the boost mode:
  • Remove Q13 and its circuit to get the octave effect out, as the picture shows, its possible to remove the 1k resistor initially to test this mod.
  • Replace the 10K in Q14 base for a 1K resistor, to increase the stomp volume.
  • Jump the part of the mode switch and cut one lead, to add the volume control to the boost mode (see in the picture below).

See the picture:

FZ-2 SF300 MOD


*Use Boss schematic above to mod this Behringer stomp box.


Friday, February 27, 2015

Les Paul wire mod


First MOD:

The first mod is the following:

  • A piece of a 0,5 mm thick guitar cable (I take off the rubber insulation and put a  shrink tubing in place), linking the jack to the pickups switch.
  • I have Used two 22nF russian PIO capacitors at the begining, and then have changed one 22nF to 15nF to the rhythm pick-up (copying the popular woman tone mod).
  • All wire used are non tinned copper thick wire.
  • Implemented a 50's style wiring to increase the highs.

*The tone is warm and big, a lot of bass and low middle, good detailed highs.
 - I guess, IMO, this tone is because the non tinned cooper thick wire and the PIO caps.
Pictures:

les paul wire

             Using a 15nF PIO:


les paul wire


les paul wire




Second MOD:


The second and current modification is as follows:

  • All wire are tinned copper wire (vintage style wire for guitar).
  • Used two Russian capacitors PIO, one 22nF for treble and one 15nF to the rhythm (yes, the woman tone mod).
  • The 50 's style wiring, to increase the highs, remains the same.
  • Big potenciometers Gotoh 24 mm for a better construction.

*Sugestion: treble bleed mod (only the capacitor without the resistor option) for volume pots - 250pF to 680pF (sorry no pictures taken).


** The tone is dry, vintage, more single coil style, most of the bass and low middle are gone , highs became more extended and predominant.
- I think, IMO, this tone is because the tinned copper cable.

Pictures: 


les paul wire



les paul wire



les paul wire



les paul wire


  • Recently I have unpotted the pickups, seeking for a more detailed tone.