Wednesday, May 15, 2013

Overdriver / Distortion Boss OS-2 or Behringer OD-100 mod


  • Change R25 + R26 to a 22K trim pot, for adjusting the distortion level and balance overdrive and distortion.
  • Change C12 to 10uF capacitor for a transparent bypass.
  • Change C7 to 1uF cap for a focused effect output with less bass (to compensate the C12 change).



See at the picture all described mods above in red:



*Use Boss schematic above to mod this Behringer stomp box.






Postado por às
Marcadores: , , , , , , , , , ,

3 comments:

  1. Elihu Dehesa GonzalezFebruary 10, 2019 at 2:57 AM

    I HAVE A BERINGHER OD300 AND MY QUESTION THAT IF THIS CHANGES FUNTION ON THIS PEDAL MODEL ?

    ReplyDelete
  2. guitar4geek@gmail.com (Roger)February 28, 2019 at 10:33 AM

    Hi, The changes only mod the tone a bit, I guess it improve and customize the pedal.

    ReplyDelete
  3. guitar4geek@gmail.com (Roger)February 28, 2019 at 10:38 AM

    I don't have the OD 300, but i ghess it works for the OD 300 too. It might be another OS 2 "copy", maybe with some little few diferences.

    ReplyDelete

Subscribe to: Post Comments (Atom)